Ajax DoorProtect Plus white EU

აღწერა

Ajax DoorProtect Plus Wireless Opening Sensor for Burglar Alarm

The Ajax DoorProtect Plus wireless alarm opening detector is equipped with a shock and tilt sensor. A wireless device is used to detect the opening of windows, doors, etc. The sensor is activated when the angle of inclination changes, opening or impact. The sensitivity level of the opening detector is adjustable. An external wired detector can be connected to the DoorProtect Plus wireless opening sensor for installation on metal hatches or gates, with the NC contact type using an external terminal. The wireless opening detector consists of a block with a reed switch and a magnet. The sensor is equipped with two magnets for different types of installation. A large magnet for parallel mounting and a small one for perpendicular mounting.

Features of the DoorProtect Plus opening sensor

The sensor is mounted without harm to the repair on the SmartBracket mount. Installation does not require disassembly of the wireless device case.
The wireless alarm opening sensor transmits the test signals to the Ajax control panel. The survey period of the detectors is adjusted individually. If you attempt to dismantle or damage the device, the central alarm panel will immediately send an alarm to users.
The information transmitted by the opening sensor is protected from interception and substitution attempts.
To check the operability of the alarm, the opening sensor regularly transmits a battery status signal to the central panel. Thanks to this principle of operation, the user will know in time about the need to replace the battery of the wireless opening sensor.
The sensor works for up to 5 years without replacing the pre-installed battery thanks to the energy saving algorithm.
The signal transmission power is adjusted depending on the distance of the opening sensor to the central unit, which allows you to consume less battery power.
Included with the opening sensor are two magnets for installing devices perpendicular or parallel.
It is possible to adjust the sensitivity to shocks at three levels and the threshold for triggering the tilt sensor is more than 5 °. There is an option to skip the first strike to avoid false positives.
The case of the wireless opening sensor is protected from opening by a tamper, which is activated when an attempt is made to damage or dismantle the device and will inform users about it.
The possibility of connecting an additional wired detector to the terminal block.