APC Smart-UPS 10000VA 230V

Description

Main input voltage
230 V

Type of product or component
Uninterruptible Power Supply (UPS)

Different input voltage
220 V
240 V

Base output voltage
230 V

Other output voltage
220 V
240 V

Rated power [W]
10000 V

Rated power [VA]
10000 VA

Type of output connector
Integral three-wire (phase + neutral + ground) 1

Battery Type
Lead-acid battery

Battery voltage
192 V

Pre-installed batteries
0

Number of empty battery compartments
0

Battery recharge time
5 hours

Battery life
is 3…5 years

Charger power (W)
235 V rated

Colour
Black (RAL 7010)

Height
68.5 cm

Width
19 cm

Depth
44.7 cm

Net weight
65 kg

Installation location
The front part

Preferred installation location
No preferences

Mounting method
It is not mounted in a rack

USB-compatible
Yes

Mounting position
Vertical

Input voltage limits
110…300 V, 60% load
176…300 V full load

Number of connectors for inputs
1 built-in three-wire wire (phase + neutral + ground)

Network frequency
automatic detection 40…70 Hz

Maximum configured power [VA]
10000 VA

Maximum configured power [W]
10000 V

Output frequency
50/60 Hz +/- 3 Hz, synchronized with the power grid

Harmonic distortion
1%

Type of UPS
Double conversion

Type of wave
Sinusoidal signal

Performance factor
94% (full load)

Additional information
Possible configuration for operation with a rated output voltage of 220: 230 or 240 V.

Bypass type
Internal bypass (with automatic or manual activation)

The amplitude coefficient
is 3:1

Ambient operating temperature
0…40 °C

Relative humidity
0…95% non-condensing

Height
0…3000 m

Ambient air temperature for collection
-15…60 °C

Relative humidity of storage
0…95% without condensation

Storage height
0…15000 m

Sound level
58 dB

Power dissipation
2128 BTU/h

Degree of protection
IP20

Alarm system
Battery operation alarm: characteristic low battery alarm: continuous overload alarm

Emergency Power Off (EPO)
So

Free Slots
1

Location of the control panel
Multifunctional LCD status and control console.